 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TCP009A SANTA ANA DIVISION DUAL ASYMETRICAL TRANSIENT SUPPRESSOR FOR XDSL AND DATA LINES PRODUCT PREVIEW DESCRIPTION KEY FEATURES !" DUAL ASYMETRICAL TRANSIENT SUPPRESSOR !" PEAK PULSE CURRENT: IPP=40A,10/1000s !" HOLDING CURRENT:50mA min. !" BREAKDOWN VOLTAGE: TCP009A: 9 V LOW DYNAMIC CHARACTERISTICS !" STAND CCITT K20 AND LSSGR W W W .Microsemi .COM This Thyristor Surge Suppressor device has been especially designed to protect against overvoltage. Two diodes clamp positive overloads while negative surges are suppressed by two protection thyristors. Particular attention has been given to the internal wire bonding. The "4point" configuration ensures a reliable protection, eliminating overvoltages introduced by the parasitic inductances of the wiring (Ldi/dt), especially for very fast transient overvoltages. IMPORTANT: For the most current data, consult MICROSEMI's website: http://www.microsemi.com APPLICATIONS/BENEFITS APPLICATIONS/BENEFIT S COMPLIES WITH THE FOLLOWING STANDARDS: CCITT K20: VDE 0433: VDE 0878: I3124: FCC part 68: BELLCORE TR-NWT-001089: 10/700 5/310 10/700 5/310 1.2/50 1/20 0.5/700 0.2/310 02/10 02/10 s s s s s s s s s s 1 kV 38 A 2 kV 50 A 1.5 kV 40 A 1 Kv 38 A 2.5 kv 125 A (*) 2.5 kv 125 A (*) 1 kV 40 A (*) !" 02/10 s 02/10 s 10/1000 s 10/1000 s (*) with series resistors or PTC. UL94V-0 TCPxx packages comply with requirements of UL94V-0 TCP009A TCP009A Copyright 2000 MSC1635.PDF 2000-12-01 Microsemi Santa Ana Division 2830 S. Fairview Street, CA. 92704, 714-979-8220, Fax: 714-557-5989 Page 1 TCP009A SANTA ANA DIVISION DUAL ASYMETRICAL TRANSIENT SUPPRESSOR FOR XDSL AND DATA LINES PRODUCT PREVIEW ABSOLUTE MAXIMUM RATINGS (Tamb = 25C) Symbol IPP ITSM ITSM Tstg Tj Parameter Peak pulse current (see note 1) 10/1000 s 5/310 s 2/10 s t = 300 ms t=1s t=5s Value 40 50 125 10 50 1 1 -55 to + 150 150 260 Unit A W W W .Microsemi .COM Non repetitive surge peak on-state current F = 50 Hz F=50Hz, 60x1s, 2mn between pulse Storage temperature range Maximum junction temperature A A C C Maximum lead temperature for soldering during 10s TL waveform: Note 1 : Pulse waveform : Note 1: Pulse wave 10/1000 s 5/310 s 2/10 s tr = 10 s tr = 5s tr = 2s tp = 1000 s tp = 310 s tp = 10 s THERMAL RESISTANCES Symbol Rth (j-a) Parameter Junction to ambient Value 170 Unit C/W Symbol VRM IRM VBR VBO IH VF VFP IBO IPP C T ELECTRICAL CHARACTERISTICS (Tamb= 25C) Parameter Stand-off voltage Leakage current at stand-offvoltage Breakdown voltage Breakover voltage Holding current Forward voltage drop Peak forward voltage Breakover current Peak pulse current Capacitance Temperature coefficient ELECTRICALS ELECTRICALS Copyright 2000 MSC1635.PDF 2000-12-01 Microsemi Santa Ana Division 2830 S. Fairview Street, CA. 92704, 714-979-8220, Fax: 714-557-5989 Page 2 TCP009A SANTA ANA DIVISION DUAL ASYMETRICAL TRANSIENT SUPPRESSOR FOR XDSL AND DATA LINES PRODUCT PREVIEW W W W .Microsemi .COM 1 - PARAMETERS RELATED TO DIODE LINE / GND Symbol VF IF=1A Test Conditions tp=100 s Min Typ Max 2 Unit V 2 - PARAMETERS RELATED TO PROTECTION THYRISTOR Types IRM @ VRM max IR @ VBR min VBO max V 12 min V 50 IBO max mA 400 IH min mA 50 C max pF 30 TCP009A A 10 V 8 mA 1 V 9 ELECTRICALS ELECTRICALS Copyright 2000 MSC1635.PDF 2000-12-01 Microsemi Santa Ana Division 2830 S. Fairview Street, CA. 92704, 714-979-8220, Fax: 714-557-5989 Page 3 TCP009A SANTA ANA DIVISION DUAL ASYMETRICAL TRANSIENT SUPPRESSOR FOR XDSL AND DATA LINES PRODUCT PREVIEW W W W .Microsemi .COM NOTES NOTES Copyright 2000 MSC1635.PDF 2000-12-01 Microsemi Santa Ana Division 2830 S. Fairview Street, CA. 92704, 714-979-8220, Fax: 714-557-5989 Page 4 TCP009E SANTA ANA DIVISION TRANSIENT SUPPRESSOR FOR XDSL AND DATA LINES PRODUCT PREVIEW DESCRIPTION KEY FEATURES !" BIDIRECTIONAL TRIPLE CROWBAR PROTECTION !" PEAK PULSE CURRENT: IPP = 30 A, 10/1000 s !" BREAKDOWN VOLTAGE: 9V * AVAILABLE IN SO8 PACKAGES * LOW DYNAMIC BREAKOVER VOLTAGE: 15 V @ 2/10 s * Low Capacitance: 30 pF APPLICATIONS/BENEFITS APPLICATIONS/BENEFIT S W W W .Microsemi .COM Transient suppressor TCP009 is dedicated to XDSL, T1, Ethernet, and data lines protection. Important features - very low breakover voltage combined with low capacitance. May be used as a triple or a single bidirectional suppressor - see schematic diagram. This product provides: - low capacitance, allowing high speed signal transmissions with low losses - low dynamic breakover voltage, protecting submicron microelectronic circuitry - Compliance with BELLCORE 1089-GR requirements for intrabuilding lightning and power fault surges. IMPORTANT: For the most current data, consult MICROSEMI's website: http://www.microsemi.com !" COMPLIES WITH THE FOLLOWING STANDARDS: CCITT K17 - K20 VDE 0433 VDE 0878 CNET 10/700 s 5/310 s 10/700 s 5/310 s 1.2/50 s s 1/20 0.5/700 s 0.2/310 s 1.5 38 2 50 1.5 40 1.5 38 KV A KV A KV A KV A UL94V-0 TCPxx packages comply with requirements of UL94V-0 TCP009E TCP009E Copyright 2000 MSC1635.PDF 2000-12-04 Microsemi Santa Ana Division 2830 S. Fairview Street, CA. 92704, 714-979-8220, Fax: 714-557-5989 Page 1 TCP009E SANTA ANA DIVISION TRANSIENT SUPPRESSOR FOR XDSL AND DATA LINES PRODUCT PREVIEW W W W .Microsemi .COM ELECTRICAL PARAMETERS @ 25C (unless otherwise specified) Symbol IPP Parameter Peak pulse current (see note 1) Value 10/1000 s 5/320 s 2/10 s tp = 10 ms 30 40 90 8 3.5 Unit A ITSM Tstg Tj TL Non repetitive surge peak on-state t=1s current (F = 50 Hz). Storage temperature range Maximum junction temperature Maximum lead temperature for soldering during 10s A C C -55 to + 150 150 260 Note 1 : Pulse waveform : 10/1000s tr=10s tp=1000s 5/310s tr=5s tp=310s 2/10s tr=2s tp=10s THERMAL RESISTANCES Symbol Rth (j-a) Junction to ambient Parameter SO 8 Value 170 Unit C/W ELECTRICALS ELECTRICALS Copyright 2000 MSC1635.PDF 2000-12-04 Microsemi Santa Ana Division 2830 S. Fairview Street, CA. 92704, 714-979-8220, Fax: 714-557-5989 Page 2 TCP009E SANTA ANA DIVISION TRANSIENT SUPPRESSOR FOR XDSL AND DATA LINES PRODUCT PREVIEW ELECTRICAL CHARACTERISTICS (Tamb= 25C) W W W .Microsemi .COM Symbol VRM IRM VBR VBO IH IBO IPP VF C Parameter Stand-off voltage Leakage current Breakdown voltage Breakover voltage Holding current Breakover current Peak pulse current Forward Voltage Drop Capacitance Types IRM @ VRM max IR @ VBR min VBO max note 1 VBO dyn typ V 15 min IBO max note 1 mA 50 mA 400 IH min CP max TCP009E A 10 V 5 mA 1 V 9 V 12 mA 50 pF 30 Note 1 : Surge test according to CCITT 1.5kV,10/700 ms between Tip or Ring and ground. ELECTRICALS ELECTRICALS Copyright 2000 MSC1635.PDF 2000-12-04 Microsemi Santa Ana Division 2830 S. Fairview Street, CA. 92704, 714-979-8220, Fax: 714-557-5989 Page 3 TCP009E SANTA ANA DIVISION TRANSIENT SUPPRESSOR FOR XDSL AND DATA LINES PRODUCT PREVIEW W W W .Microsemi .COM NOTES NOTES Copyright 2000 MSC1635.PDF 2000-12-04 Microsemi Santa Ana Division 2830 S. Fairview Street, CA. 92704, 714-979-8220, Fax: 714-557-5989 Page 4 |
Price & Availability of TCP009A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |